Frequently Asked Questions
33. Why the BIOS cannot recognize all devices connected to the secondary IDE interface?
Is the power connected?
Is the IDE interface cable correctly connected? (Make sure it is completely plugged in)
Is the setup correct? Is the position of the jumper pin correctly set? (Please refer to jumper setting instruction)
On the BIOS, is the secondary disabled? (For detailed information on BIOS settings, please contact the PCs manufacturer)
Is the secondarys interface cable too long? (According to the spec, the total length of the cable should be less than 18" (to maintain signal integrity).
Is the IDE cables pin twisted? (Also, make sure there is no reversed insertion.)
|
