Firmware Update Procedure

  1. Download appropriate Firmware and unzip the file into a folder of your choice.
  2. Launch the exe-file to flash your drive.
  3. In case of difficulties, please flash the drive in PIO mode - Changeable in WinXP & W2K/Vista in the device manager - "IDE ATA/ATAPI controllers", choose the right channel and switch from DMA to PIO mode.
  4. Flash your drive and restart the pc.

Important: Do not turn off power during the flashing process.

Note: Warranty will be lost during false flashing procedure, especially when unofficial modified firmwares were used before. In such cases we cannot offer you any further solution. You will then be responsible for repair costs.


If you have any further questions or did not find a solution to your problem please make use of our